Car Motorcycle Fuel Line Quick-Connect Fitting Kit, 24pcs /Box 6mm, 24pcs /Box 8mm

1. Product material: PA12 Nylon Plastic
2. Function: quick connectors are used for quick connection, conversion, and disconnection between different fuel lines in a vehicle's fuel system.
3. Features: can be used to connect fuel system components such as fuel pumps and fuel filters.
4. Product dimensions: 5x2x2cm

Installation steps:
1. Confirm specification match: select the corresponding connector from the kit based on the fuel system interface diameter (e.g., 7.89mm, 9.49mm, 9.89mm to 8mm).
2. Prepare the pipe port: ensure the steel pipe or nylon hose end is clean and burr-free, and check that the sealing ring is intact.
3. Push in connection: align the bundy end or straight end of the connector with the original vehicle interface and push firmly until it locks in place. A "click" sound indicates it is locked in place.
4. Install the buckle end: If it is a hose connection, slide the fuel hose onto the buckle end, ensuring it completely covers the buckle teeth; clamps can be used for fixation if necessary.
5. Check for leaks. After installation, gently pull the connector to ensure it is not loose, and check for leaks after starting the fuel system.
6. Disassemble as needed. If replacement or repair is required, use a manual unlocking clip or a special disassembly tool according to the connector type. Avoid forcibly pulling it out, which may cause damage.